Step Motor And Drive

Product Details:

Price Range:

• 2500-6500 Rs/Piece

Features:

• 2-phase 1.8° step angle
• NEMA 34 frame size
• 1,203.0 oz-in (8.5 Nm) holding torque
• Single shaft of 0.500 inch
• industrial quality
• High accuracy
• Smooth movement
• Low motor heating

Product Details:

Made of high-quality cold roll sheet copper and anti-high temperature permanent magnet, Leadshine's stepper motors are highly reliable and generate low motor heating. Because of their nice internal damping characteristics, those stepping motors can run very smoothly and have no obvious resonance area within the whole speed ranges.The 573S15 three-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 6 motor leads, the motor can be connected in delta connection.

Features:

• 3 phase 1.2 degree stepping angle.
• Standard NEMA 23 dimensions.
• High precision.
• Smooth movement.
• Low motor heating.
• Low movement noise.

Price Range:

• 2500-6500 Rs/Piece

Product Details:

Price Range:

• 5500-8500 Rs/Piece

Product Details:

Price Range:

• 11000-15000rs/piece

Product Details:

Features:

• Step & direction (PUL/DIR) or CW/CCW (double pulse) control
• 20-50VDC supply voltage
• 200 KHz max pulse input frequency
• 5V / 24V control signal voltage setting by DIP switch, default is 24V
• 16 micro step settings of 200-25,600 via DIP switches, or 200-51,200 via software (increase by 200)
• 8 output current settings of 1.0-4.2A via DIP switches, or 0.5-4.2A via software
• Configurable control command smoothing time to reduce motor vibration
• Automatic idle current reduction to 50% or 90%
• Convenient self-test for easy diagnosis
• Automatic self-configuration to match wide-range NEMA 17, 23, and 24 stepper motors
• Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
• Soft-start with no “jump” when powered on
• Optically isolated inputs
• Fault output and Barke output
• Over-voltage and over-current protections
• CE certified and RoHS compliant

Price Range:

• 5500-8500 Rs/Piece

Product Details:

The DM860 is a fully digital stepper drive developed with advanced DSP control algorithm based on the latest motion control technology. It has achieved a unique level of system smoothness, providing optimal torque and nulls mid-range instability. It's motor auto-identification and parameter auto-configuration feature offer quick setup to optimal modes with different motors. Compared with traditional analog drives, DM860 can drive a stepper motor at much lower noise, lower heating, and smoother movement. Its unique features make DM860 an ideal choice for high requirement applications.

Features:

• Anti-Resonance provides optimal torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology offers optimal responses with different motors
• Multi-Stepping allows a low-resolution step input to produce a higher micro step output, thus offers smoother motor movement
• 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
• Soft-start with no “jump” when powered on
• Input voltage 24-80VDC
• 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
• Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current protections

Applications:

• Suitable for a wide range of stepping motors, from NEMA size 17 to 42. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed, and high precision.

Price Range:

• 5500-12000 Rs/Piece